BIJOY TRADING COMPANY
 

Home Page
Company Profile
Our Products
    Steel & Stainless Steel Products & Components
Home » Products » Steel & Stainless Steel Products & Components » CRCA High Carbon Steel Strips

CRCA High Carbon Steel Strips



CRCA High Carbon Steel Strips   Next >>

Product Code : 03

Product Specification
CRCA High Carbon Steel Strips

High carbon steels contain from 0.7 to 1.00% C with manganese ranging from 0.5% to 0.9% This steels are commonly known as spring steel. These steels are generally operated at very high stresses and heat-treated to obtain the maximum elastic limits and fatigue resistance without becoming sufficiently brittle to cause sudden failure in service. Hardenability of spring steel is very important because only fully hardened springs have the maximum resistance to take a permanent set (sagging).

We offer the following grades in spring steel:
  • Grade C-80
  • Grade C-98

Grade C-80

Chemistry

Carbon %

0.75 to .85

Silicon %

0.10 to 0.35

Manganese %

0.60 to 0.90

Sulphur % 

0.05 max

Phosphorus % 

0.05 max


Physical Properties:
  • Hardness: 220HV max
  • Yield Stress: 290N/mm2 min
  • Tensile Strength: 640N/mm2 max
Range:
  • Thickness: 0.07 mm to 4.00 mm
  • Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can be supplied)
  • Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN.

Grade C-98

Chemistry

Carbon %

0.90 to 1.03

Silicon %

0.10 to .35

Manganese %

0.50 to 0.80

Sulphur % 

0.05 max

Phosphorus % 

0.05 max


Physical Properties:
  • Hardness: 220HV max
  • Yield Stress: 290N/mm2 min
  • Tensile Strength: 640N/mm2 max
Range:
  • Thickness: 0.07 mm to 4.00 mm
  • Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can be supplied)
  • Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN.
This is a very special grade of steel & is mainly used for making those components where very high tensile strength & yield stress is required. It can achieve hardness of up to 58 HRC Rockwell after Hardening & Tempering. This grade is commonly used for making different kinds of Industrial knives, because due to high hardness it can give a better knife edge & thus a better cutting capacity.

Application: Mainly used for making automobile components, knives for cutting foam & plastics, doctor blades, etc.
Other Products in 'Steel & Stainless Steel Products & Components' category
Low Alloyed Steel Strips
Low Alloyed Steel Strips
Medium Carbon Strips
Medium Carbon Strips
Rolling Hard Steel Strips
Rolling Hard Steel Strips
CRCA Steel Strips
CRCA Steel Strips
Razor Blade Steel Strips
Razor Blade Steel Strips
Low Carbon Strips
Low Carbon Strips
 
View all products(8)
 
<< Back
 
Contact Details
BIJOY TRADING COMPANY
21-A, B.R.B. Basu Road, Canning Street, Ground Floor, Kolkata - 700001, West Bengal, India
Phone:91-33-22308641/22302063/26662742(R)
Fax:91-33-22302063
Send Mail   Send SMS   
Key Personnel
Mr. Prakash Narsaria (Proprietor)
Mobile:+919830230111, +919331040216

 
Copyright © 2011-12 by BIJOY TRADING COMPANY All Rights Reserved.